Key features
- Free space, wireless communication.
- Compact system design.
- Full duplex wire speed connectivity.
- Industry standard fibre optic interfaces.
- Secure data transmission.
- Quick installation and re-deployment.
- Built-in signal monitoring.
- License free operation.
New features
- Automatic beam divergence setting.
- Automatic beam calibration.
- Movement compensation.
- Dynamic beam shaping.
- No interference.
Applications
- Interconnect LAN's in campus or industrial environment.
- Emergency backup.
- VoIP connectivity.
- Temporary installations.
- Replace lower speed leased lines or radio links.
- IP-based security applications.
GeoDesy FSO AF system
GeoDesy AF systems provide an increased reliability through an advanced technology improvement, which dy-namically changes the shape to the transmitting laser beam. If the weather gets bad the transmitting beam size will decrease to concentrate the optical power distributed. This way the GeoDesy FSO AF series will have a higher relia-bility figure. In the case of the standard no AF FSO systems finding the optimal beam shape is always a hard task, and most cases, the beam setting good for bad weather might not provide enough coverage for physical movement.
The solution is here! The AF system will keep the beam size and this way the transmission always on an optimal rate.
Technical data
Electrical characteristics
| Light source: |
laser diode |
| Laser diode power: |
1 × 35 mW |
| Detector: |
Si APD Photodiode |
| Dynamic range: |
>35 dB |
| Bandwidth: |
100 Mbps |
| Management: |
Web based SNMP compatible ln-band |
| System latency: |
<50 ns |
Physical characteristics
| Head housing: |
aluminium alloy |
| Weight: |
4 kgs |
| Dimensions (with cover and alignment unit): |
200 × 350 × 241 mm |
Optical characteristics
| Wavelength: |
785 nm |
| Beam divergence: |
1–10 mRad |
| Receiver acceptance angle: |
8.5 mRad |
| Laser class: |
Class 1M |
Environment
| Operating temperature: |
-40°C – +60°C |
| Storage temperature: |
-60°C – +80°C |
| Humidity: |
95% non condensed |
| Laserhead protection rating: |
IP65 |
| Power supply protection rating: |
IP65 |
Power
| Power required: |
IEEE 802.3af (Power over Ethernet) |
| Power to the head: |
IEEE 802.3af (Power over Ethernet) |
| Power to the head: |
2 × 48 VDC |
Fade margin @1000 m
| Normal visibility (fog 3 dB/Km, rain ~6 mm/h): |
max. 25 dB |
| Medium visibility (fog 15 dB/Km, rain ~50 mm/h): |
max. 17 dB |
| Low visibility (fog 30 dB/Km, rain ~130 mm/h): |
max. 7 dB |
Order information
| Product code |
Description |
| PX-P1000E100/AF/TP |
Pinto Next link 100BaseTX Ethernet IF 500–1000 m distance. POE power supply, installation kit, SNMP web management included with Automatic beam shaping. |
| PX-P1000E100/AF/TP/h |
Pinto Next link w/ window heating100BaseTX Ethernet IF 500–1000 m distance. POE power supply, installation kit, SNMP web management included with Automatic beam shaping. |
